SPECIFICATIONS
Black PVC sheath XLPE insulated armored copper power cable YJV22 YJV32 YJV NYY,NAYY,YVV,NYCY,NYRY,NA2XY,YE3SV,YE2SHSV,NAYCVVY,NA2XY,N2XY,N2XRY Cable
Voltage:5/46KV
1.Conductor:
-Solid or stranded Copper/Aluminum
2.Insulation:
-Cross linked polyethylene( XLPE or PVC)
-Circuit Indentation:
-The insulation shall be red, black
-Filler:
-Polypropylene lament with lapped binding tape
-Inner Sheath:
-Polyvinyl chloride (Black)
-Armor:
-Galvanized steel wire/steel tape/Unarmored/Aluminum wire
-Core-covering:
-Binding tape
-Outer Sheath:
-Polyvinyl chloride (Black)
APPLICATION
-For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.
-Standards:-IEC 60502-1
NOMINAL CROSS-SECTIONAL AREAS
1.5 mm2 , 2.5 mm2 ,4 mm2 , 6 mm2 , 10 mm2 , 16 mm2 ,25 mm2 , 35 mm2 , 50 mm2 ,70 mm2 , 95 mm2 ,120 mm2 ,150 mm2 ,185 mm2 ,240 mm2 ,300 mm2 400 mm2 500 mm2 630 mm2 800 mm2
PRODUCTION RANGE
single core cable from 1.5 mm2 to 800 mm2,muli-core cable from 1.5 mm2 to 400 mm2
OPERATING CHARACTERISTICS
Rated power-frequency voltage u0/u:0.6/1 KV 3.6/6KV 12/20KV 18/35KV…
Max permissible continuous operating temperature of conductor 70
Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): cross-section of conductor 300 mm2
The ambient temperature under installations should not be below 0
The bending radius of single core cable should not be less than 20 times of the cable diameter ,the bending radius of multi-core cable should not be less than 15 times of the cable diameter.
